HP UX System Management Software The, itool, HP-UX, Ignite-UX, “Create the, Common Errors, Server” (page 12), OE Configuration Information on the

Common Errors

Failed to read “INDEX” file from the install server. Check that the install server's IP address is correct and the server has the “Ignite-UX” product loaded and is available via the tftp(1) service.

Press any key to return to the network configuration menu:Diagnosis: The client can't find the Ignite-UX server.

Correction: One possibility is that the wrong LAN was selected from the “LAN Interface Selection” menu above. Press any key to return to the LAN Interface Selection menu and make sure the correct LAN is selected.

6.The Ignite-UX server will then be contacted for installation configuration information for the client. (A dialog box will be displayed on the server with information that this client has been found.) The client configuration information is then displayed in the TUI version of the client installation configuration interface, also referred to as itool.

From the Configurations: data field, select the correct cfg clause. This is the cfg clause you created in step 2 of “Create the HP-UX OE Configuration Information on the Ignite-UX Server” (page 12), and was named “B.11.23 From OE Media” in the example.

28 Cold-installing a Client Across the Network