3.Install the Ignite-UX software using swinstall if the Ignite-UX version on the DVD is later than any currently installed version of Ignite-UX and the HP-UX version on the OE media matches the HP-UX version on the Ignite-UX server.

Procedure

#swinstall -s /dvdrom Ignite-UX

Common Errors

ERROR: Could not apply the software selection “Ignite-UX”; it is not available from depot or root “server_name:/dvdrom”.

Diagnosis: The DVD in the drive does not have Ignite-UX on it.

Correction: Unmount the DVD drive with this command:

# umount /dvdrom

Put in another OE DVD and mount it as in step 1c. Then use the swinstall command again.

ERROR: “server_name:/” 19 filesets have a version with a higher revision number already installed.

Diagnosis: A higher version of Ignite-UX is already installed on the server system.

Correction: Proceed to the next step.

Explore

You can list all the software bundles on the DVD with

#swlist -s /dvdrom

4.Unmount the DVD so you can extract it from the drive.

Procedure

#umount /dvdrom

Common Errors

# unmount /dvdrom: cannot unmount /dvdrom : Device busy

Diagnosis: A process is still using files on the DVD, or a process has its current working directory on the DVD.

Correction:

a.Run the fuser command to see what processes are using the DVD.

#fuser /dvdrom /dvdrom: 8553c

b.To find out what commands are using the DVD device, run the following command for each process id (numbers only, in this case 8553) shown by the fuser command.

#ps -e grep -e 8553

root

8553

8552

1

Jul 10

pts/tb

0:00

-sh

root

11087

8553

0

14:34:07

pts/tb

0:00

grep -e 8553

In this case, the shell attempting to run unmount had /dvdrom as its current working directory, and changing to another directory would allow the DVD to be unmounted.

5.Create the HP-UX OE depot, named core_media, by running make_depots on each of the HP-UX OE DVDs. In this example we are using HP-UX 11i v2, but this process can easily be customized for any HP-UX release by substituting your release information for the HP-UX 11i v2 information. The make_depots command takes a long time to complete. When make_depots completes without errors, no messages are printed to the screen – all messages are printed to the /var/opt/ignite/depots/Rel_B.11.23/swagent.log file

Install the Ignite-UX Software and the HP-UX OE Depot on the Server 11