HP f1905 19 inch, vs19b 19 inch, vs19e 19 inch, vs19c 19 inch, vs17e 17 inch Setting Up the Monitor

Setting Up the Monitor

5.Save the removed items (screws, hinge cover, pedestal, and base) for future use.

6.Mount the vs monitor to a swing arm or other mounting fixture.

The four threaded mounting holes on the back of the panel, located around the HP logo, are compliant with the VESA standard for mounting flat-panel monitors. The vs15 Monitor uses the 75 mm spacing standard, while the other vs Monitors use the 100 mm spacing standard.

Use the four holes to attach a swing arm or other mounting fixture. Follow the instructions included with the mounting fixture to ensure that the monitor is safely attached.

To reinstall the desktop pedestal and base for the vs monitor:

1.Remove the mounting fixture.

2.Reverse the preceding instructions to slide the pedestal onto the panel, insert the three screws, and then place the hinge cover onto the hinge. Reinstall the base.

3–6 User’s Guide