HP vs19e 19 inch, vs19b 19 inch, vs19c 19 inch Adjusting Screen Quality, Optimizing Analog Video

Operating the Monitor

Adjusting Screen Quality

The auto-adjustment feature automatically fine-tunes the image quality for display size, position, clock, and phase each time a new video mode is displayed. For more precise adjustments of VGA input, run the Auto-Adjustment software on the CD. See “Using the Auto-Adjustment Function” in this chapter.

If additional image quality improvement is desired, use the Clock and Phase controls of the monitor to fine-tune the image. See “Optimizing Analog Video” in this chapter.

Optimizing Analog Video

This monitor contains advanced circuitry that allows the monitor to function as a standard analog monitor. Two controls in the Advanced Menu OSD can be adjusted to improve analog image performance:

■Clock — Increase or decrease the value to minimize any vertical bars or stripes visible on the screen background.

■Clock Phase — Increase or decrease the value to minimize video distortion or video jitter.

Use these controls only when the auto-adjustment function does not provide a satisfactory monitor image in analog mode.

To obtain the best results:

1.Allow the monitor to warm up for 20 minutes before adjusting.

2.Display the adjustment pattern application provided on the CD.

3.Access the Advanced Menu OSD; select Image Control.

4.Set the main Clock correctly first, because the Clock Phase settings depend on the main Clock setting.

❏When adjusting the Clock and Clock Phase values, if the monitor images become distorted, continue adjusting the values until the distortion disappears.

To restore the factory settings, access the Advanced Menu OSD, select Factory Reset, and then select Yes.

User’s Guide 4–15