Select

To do this

 

 

 

● Enable/disable SD Card boot (enabled by default).

 

● Enable/disable floppy boot (enabled by default).

 

● Enable/disable PXE Internal NIC boot (enabled by

 

default).

 

● Enable/disable Unified Extensible Firmware Interface

 

(UEFI) Boot Mode (disabled by default).

 

● Set the Legacy Boot Order.

 

 

Device Configurations

● Enable/disable USB legacy support (enabled by default).

 

When enabled, USB legacy support allows the

 

following:

 

◦

Use of a USB keyboard in Computer Setup even

 

 

when a Windows® operating system is not running

 

◦

Startup from bootable USB devices, including a hard

 

 

drive, diskette drive, or optical drive connected by a

 

 

USB port to the computer

 

● Select a parallel port mode: ECP (Enhanced Capabilities

 

Port), standard, bidirectional, or EPP (Enhanced Parallel

 

Port).

 

● Enable/disable fan always on while connected to an AC

 

outlet (disabled by default).

 

● Enable/disable Data Execution Prevention (select models

 

only). When enabled, the processor can disable some

 

virus code execution, which helps to improve computer

 

security (disabled by default).

 

● SATA (Serial Advanced Technology Attachment) device

 

mode. The following options are available:

 

◦

AHCI (Advanced Host Controller Interface)

 

◦

IDE (Integrated Drive Electronics)

 

◦

RAID (select models only)

 

NOTE: Availability of these options varies by computer

 

model.

● Enable/disable secondary battery fast charge (enabled by default).

● Enable/disable HP QuickLook (enabled by default).

● Enable/disable Preboot Authentication on HP QuickLook Boot (enabled by default).

● Enable/disable HP QuickWeb (enabled by default).

● Enable/disable HP QuickWeb Elevated Security (disabled by default).

● Enable/disable Virtualization Technology (select models only; disabled by default).

● Enable/disable Wake on USB (enabled by default).

148 Chapter 13 Computer Setup