Installing an optional hard drive

Installing an HP Personal Media Drive

You can insert an HP Personal Media Drive into the docking station for extra storage capacity.

1.Remove the hard drive carrier screw (1) on the rear panel of the docking station and remove the hard drive cover (2) from the hard drive bay.

CAUTION: To reduce the possibility of damaging the hard drive cover, grasp the hard drive cover from the bottom to remove it.

2.Insert the hard drive (1) into the hard drive bay until the drive is fully seated.

NOTE: If the hard drive light (2) does not turn on, reseat the hard drive.

ENWW	Installing an optional hard drive 27

Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/