TouchPad
Description | Spare part number |
|
|
TouchPad (includes cable) | |
|
|
Before removing the TouchPad, follow these steps:
1.Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.
2.Disconnect the power from the computer by unplugging the power cord from the computer.
3.Disconnect all external devices from the computer.
4.Remove the bottom cover (see Bottom cover on page 33).
5.Remove the battery (see Battery on page 35).
Remove the TouchPad:
1.Release the ZIF connector to which the TouchPad cable is attached, and then disconnect the TouchPad cable (1) from the TouchPad system board.
2.Detach the TouchPad cable (2) from the top cover. (The TouchPad cable is attached to the top cover with
3.Remove the seven Phillips PM2.0×3.0 screws (3) that secure the TouchPad to the top cover.
52 | Chapter 4 Removal and replacement procedures |
