Getting Started with Your HP Notebook
Setting Up Your Computer
2.Insert the front end of the battery into the battery compartment on the bottom of the computer, then press the back end in until it clicks into place.
To remove the battery
1.Do one of the following:
•Plug in the AC adapter.
•Press the blue sleep button to put the computer into Standby mode. While the computer is in this mode, you must insert the replacement battery within two minutes of removing the discharged battery.
•Shut down the computer or put it into Hibernate mode.
2.Slide the battery’s release latch, then lift the battery out of its compartment.
20 Startup Guide