Panasonic VQT4J11, DMCLX7W Charging battery, Detach the battery after charging is completed

Preparations

Charging battery

Always charge before first use! (battery shipped uncharged)

■■About batteries that you can use with this unit

It has been found that counterfeit battery packs which look very similar to the genuine products are made available to purchase in some markets. Some of these battery packs are not adequately protected with internal protection to meet the requirements of appropriate safety standards. There is a possibility that these battery packs may lead to fire or explosion. Please be advised that we are not liable for any accident or failure occurring as a result of use of a counterfeit battery pack. To ensure that safe products are used we recommend that a genuine Panasonic battery pack is used.

••Use the dedicated charger and battery.

Position the battery contacts to meet the charger, then insert the battery into the charger

Plug the charger into the AC power

●●Plug-in type

Battery

Charger (model-specific)

●●Inlet type

••The AC cable does

not fit entirely into the AC input

terminal. A gap will remain.

Charging light ([CHARGE])

On: Charging in progress

Off: Charging complete

If light is flashing: ••Charging may take longer

than normal if battery temperature is too high or too low (charging may not be

●●Charge the battery with the charger indoors (10 °C to 30 °C (50 °F to 86 °F)).

completed). ••Battery/charger connector is

dirty. Clean with a dry cloth.

Detach the battery after charging is completed

●●The battery charger is in the standby condition when the AC power is supplied. The primary circuit is always “live” as long as the battery charger is connected to an electrical outlet.

- 14 - VQT4J11