Panasonic M0712KZ0, DMCLX7W, DMCLX7K, VQT4J11 owner manual Using the built-in ND filter, 123

Application (Record)

Using the built-in ND filter

When you want to take pictures using the maximum aperture in a bright outdoor location or at a slow shutter speed, you can use the built-in ND filter to reduce the amount of light that passes through the lens.

Press the [ND/FOCUS] lever to activate the ND filter

Press

When using the built-in ND filter

••To deactivate the built-in ND filter → Press the lever again.

●●The built-in ND filter makes a light amount adjustment that is equivalent to approximately 3 EV stops.

●●The built-in ND filter is automatically activated when [Program Diagram] is set to modes other than [   ] in [Program AE] Mode.

●●Activated automatically during [Smooth Defocus] or [Radial Defocus] in [Creative Control] mode.

●●You cannot switch the setting of the built-in ND filter when recording a motion picture.

- 123 - VQT4J11