Panasonic DMCLX7W, DMCLX7K, M0712KZ0, VQT4J11 owner manual Version Disp, Format

Preparations

Using the [Setup] menu

••For the setting procedures of the menu. (→25)

[Version Disp.]

Check the camera firmware version or display software information.

●●When you press [MENU/SET] while the version is displayed, software information such as the license is displayed.

[Format]

Use when [Built-In Memory Error] or [Memory Card Error] appears, or when formatting the built-in memory or card.

When a card/built-in memory is formatted, the data cannot be restored. Check the content of the card/built-in memory carefully before formatting.

●●When formatting the built-in memory, remove the cards.

(Only inserted card will be formatted if present; built-in memory will be formatted if no card is inserted.)

●●Always format cards with this camera.

●●All protected pictures and other picture data will be deleted.

●●This requires a sufficiently charged battery, or an AC adaptor (optional) and DC coupler (optional). Do not turn off power or perform other operations during formatting.

●●Formatting the built-in memory may take several minutes.

●●If the card cannot be formatted, please try another card before contacting Panasonic.

For USA and Puerto Rico assistance, please call: 1-800-211-PANA(7262) or, contact us via the web at: http://www.panasonic.com/contactinfo

For Canadian assistance, please call: 1-800-99-LUMIX (1-800-995-8649) or send e-mail to: lumixconcierge@ca.panasonic.com

- 42 - VQT4J11