Others
Using with your PC
- 193 - VQT4J11

■Folder and file names on computer

DCIM (Still/motion pictures)
100_PANA (Up to 999 pictures/folder)
P1000001.JPG
:
P1000999.JPG
101_PANA
:
999_PANA
MISC (DPOF files, Favorite)
AD_LUMIX*2 *3
LUMIXUP.EXE (Uploading tool)
PRIVATE*3
AVCHD (Motion pictures in AVCHD)
*1
●Windows
Drives are displayed
in “My Computer” or
“Computer” folder.
●Mac
Drives are displayed on
the desktop.
(Displayed as “LUMIX”,
“NO_NAME”, or
“Untitled”.)
.JPG: Still pictures
.RW2: Still pictures recorded in
RAW file
.MP4: [MP4] Motion Pictures
.MPO: 3D still pictures
*1 New folders are created in the following cases:
• When the number of files in a folder exceeds 999.
• When using cards already containing the same folder number (for example, pictures taken
with other cameras, etc.).
• When recording after performing [No.Reset].
*2 Note that pictures cannot be uploaded to image-sharing websites if the files in the AD_LUMIX
folder are deleted.
*3 This folder is not created in the built-in memory.

■When using Windows XP, Windows Vista, Windows 7, or Mac OS X

The camera can be connected to your computer even if [USB Mode] (→39) is set to
[PictBridge(PTP)].
•Only picture output can be performed.
•It may not be possible to import if there are 1000 or more pictures on the card.
•Motion pictures, 3D still pictures or RAW pictures cannot be read.
●Do not use any other USB connection cables except the supplied one or a genuine
Panasonic USB connection cable (optional).
●Turn off power before inserting or removing memory cards.
●Use a sufficiently charged battery or an AC adaptor (optional) and DC coupler
(optional). When the battery begins to run out during communication, the status
indicator flashes and a warning beep sounds. Cancel communication via your
computer immediately.
●Setting the [USB Mode] to [PC] removes the need to make the setting each time the
camera is connected to the computer.
●For more details, consult your computer operating manual.