Others

Digital Camera Accessory System

Using the Live View Finder (optional)

When the Live View Finder (DMW-LVF2: optional) is used, you can view the recording screen even when taking pictures at a low camera angle, for example.

Preparation:

••Turn the camera ON/OFF switch to [OFF].

••Remove the hot shoe cover attached to the camera. (→9)

Firmly insert the Live View Finder into the hot shoe, as far as it will go

Turn the camera ON/OFF switch to [ON]

Press the [LVF/LCD] button of the Live View Finder to switch the display

••You can switch between the LCD (LCD monitor) display and LVF (Live View Finder) display.

••The display selected by pressing the [LVF/LCD] button will be stored in memory even when the camera ON/OFF switch is set to [OFF].

To automatically display the playback screen on the LCD monitor

When [Play on LCD] (→37) of the [Setup] menu is set to [ON], the LCD monitor will turn on when the camera is switched from recording mode to playback mode. This operation eliminates the time needed to switch between LCD monitor and Live View Finder when recording pictures using Live View Finder.

●●Attach and detach the Live View Finder carefully and correctly.

●●The Live View Finder cannot be used together with an external flash.

●●When the shoulder strap is attached, make sure that the strap does not get snagged on the Live View Finder.

●●Be sure to hold both the camera and the Live View Finder when the Live View Finder is attached to the camera. If you hold only the Live View Finder, it could become detached from the camera.

●●Refer to the operating instructions for the Live View Finder for further details.

- 199 -

VQT4J11

Page 199
Image 199
Panasonic VQT4J11, DMCLX7W, DMCLX7K, M0712KZ0 Digital Camera Accessory System, 199, Using the Live View Finder optional