Troubleshooting
Solving General Problems
You may be able to easily resolve the general problems described in this section. If a problem persists and you are unable to resolve it yourself or if you feel uncomfortable about performing the operation, you can contact an HP customer care center, or you can contact an authorized dealer or reseller. For a list of support telephone numbers for your
region, visit the HP website at: http://welcome.hp.com/country/us/eng/wwcontact.html
Problem | Cause | Solution |
|
|
|
Workstation appears | Software control of | Press and hold the power |
locked up and will not | the power switch is | button for at least four |
turn off when the power | not functional. | seconds until the workstation |
button is pressed. |
| turns off. |
|
|
|
Workstation will not | Workstation is in | Press the power button to |
respond to USB | standby mode. | resume from standby |
keyboard or mouse. |
| mode. |
CAUTION: When attempting to resume from standby mode, do not hold down the power button for more than four seconds. Otherwise, the workstation will shut down and you will lose your data.
Workstation date and | RTC |
time display is incorrect. | battery may need to |
| be replaced. |
| NOTE: Connecting |
| the workstation to a |
| live AC outlet |
| prolongs the life of |
| the RTC battery. |
First, reset the date and time using Computer Setup (F10). If the problem persists, replace the RTC battery. See the Service and Technical Reference Guide for instructions on installing a new battery, or contact an authorized dealer or reseller for RTC battery replacement.
Workstation appears to | Network driver is | Establish a network |
pause periodically. | loaded and no | connection, or use Computer |
| network connection | Setup (F10) to disable the |
| is established. | network controller. |
|
|
|
Getting Started Guide | www.hp.com |
