HTC 2 user manual Image Properties. Adjust the image properties

Camera and Multimedia  115

•Image Properties. Adjust the image properties.

1 Tap a property to adjust.

2 Save the settings.

3 Decrease the value.

14 Reset all properties to default.

5 Increase the value.

6 Close the Image Properties screen without applying and saving the changes.

2 3 4 5 6

•Effect. Apply a special effect to your photos or videos.

•Metering Mode. Select a metering mode to allow the camera to measure the amount of light and calculate the best-fit exposure value before capturing.

•Prefix. The file name of a newly captured photo or video is set to “IMAGE” or “VIDEO” followed by a sequential number, for example: IMAGE_001.jpg. You can also choose the current date or date and time as the file name prefix.

Note You can not change the file name prefix when saving captured photos to a storage card. Captured photos are named using the convention IMAGnnnn.jpg (where ‘nnnn’ is the counter), and are saved to the \DCIM\ 100MEDIA folder on the storage card.

•Counter. Reset the file naming counter back to 1.

•Flicker Adjustment. When taking indoor shots under fluorescent lighting, keep this setting on Auto or change it to the proper frequency (50Hz or 60Hz) of the power in your country to reduce flicker.

•Grid (Photo mode). Show a grid on the screen so you can easily frame and center your subjects.

•Record with Audio (Video mode). Select On to record videos with audio, or Off to record videos without audio.

•Recording Limit (Video mode). Set the maximum duration or file size for recording video.

•Template (Picture Theme mode). Select a template.

•Template Folder (Picture Theme mode). By default, templates are stored in the \My Documents\ Templates folder on the device’s Main Memory. If you transferred some templates to a storage card, set this option to Main + Card.

•Show Reminder (Contacts Picture mode). Select On if you want the Camera to prompt you to assign the captured picture to a contact.

•Direction (Panorama mode). Choose the direction in which to stitch the photos in a panorama.

•Stitch Count (Panorama mode). Select the number of shots to take and stitch into a panorama.