HTC ELF0160 user manual Configure Wireless Networks screen, To add a new Gprs connection

Getting Connected 137

•Configure Wireless Networks screen.

Tap Start > Settings > Connections tab > Wi-Fi > Wireless tab. This screen displays the wireless networks currently available.

To connect to a wireless network in the list, tap and hold on the desired network, then tap Connect.

Tap a wireless network in the list to view or change its connection settings.

You can also add new wireless networks, if available, by tapping Add New.

10.5GPRS

Use GPRS (or EDGE, if available) to connect to the Internet and to send and receive picture messages on your device. You will need a data plan to use your wireless service provider’s GPRS network. Check with your wireless service provider to find out about GPRS rates.

GPRS settings are already preconfigured on your device, and your device is ready to use your wireless service provider’s GPRS services. Please do not change the settings as this may cause services to stop working.

To add a new GPRS connection

In times when you need to add another GPRS connection on your device, obtain the Access point name from your wireless service provider. Also, check if a user name and password are required.

1.Tap Start > Settings > Connections tab > Connections.

2.Under My ISP, tap Add a new modem connection.

3.On the Make New Connection screen, enter a name for the connection.

4.In the Select a modem list, select Cellular Line (GPRS), then tap Next.