HTC ELF0160 user manual Charge the battery, To automatically configure data connection settings

22 Getting Started

To automatically configure data connection settings

1.When you see the notification message from the Network Wizard, tap Yes.

Note If you do not see the notification message, tap on the title bar to display the message.

2.If your SIM card supports multiple network operator profiles, a message will appear with network profile choices. Select the profile you want to use and tap OK.

3.Network Wizard then starts to configure your device’s data connection settings.

4.After the Network Wizard completes the configuration, tap Restart.

For more information about the Network Wizard, see Chapter 10.

Charge the battery

New batteries are shipped partially charged. Before you start using your device, it is recommended that you charge the battery. Some batteries perform best after several full charge/discharge cycles. You can charge the battery in two ways:

•Charging the device’s battery by connecting the power adapter.

•Connecting your device to a PC via the provided USB Sync cable.

Note Only the AC adapter and USB cable provided with your device should be used to charge the device.

Charging is indicated by a solid amber light on the left LED indicator.

As the battery is being charged while the device’s power is on, a charging icon ( ) will be shown on the title bar of the Today screen. After the battery has been fully charged, the left LED becomes green and a full

battery icon ( ) appears on the Today screen’s title bar.

Warning!	• Do not remove the battery from the device while you are charging it
	using the AC or car adapter.
	• As a safety precaution, the battery stops charging when it overheats.