HTC ELF0160 To use Block Recognizer, To write using Transcriber, To enter punctuation and symbols

48 Entering and Searching Information

2.4 Using Block Recognizer

With Block Recognizer, you use a single stroke to write letters, numbers, symbols, and punctuation, which are then converted into typed text.

To use Block Recognizer

1.From a program, tap the Input Selector arrow, and tap Block Recognizer.

2.Write characters, numbers, and symbols in the designated writing area.

•Enter letters by writing in the abc (left) area of the box.

•Enter numbers by writing in the 123 (right) area of the box.

•Enter symbols and punctuation by tapping in either area of the box and then writing the desired character.

Note	Block Recognizer is available when text entry is possible.
Tip	For help with writing characters with Block Recognizer, tap the question
	mark near the writing area.

2.5 Using Transcriber

Transcriber is a handwriting recognition program that allows you to write in cursive, print, or a combination of both.

To write using Transcriber

1.Start a program that accepts user input, such as Word Mobile.

2.Tap the Input Selector arrow, and tap Transcriber. The Transcriber introductory screen appears.

3.Position the cursor where you want text to appear.

4.Use the stylus to write anywhere on the screen. The handwriting will be converted to text shortly after you lift the stylus from the screen.

To enter punctuation and symbols

Transcriber comes with an on-screen keyboard that provides an easy way to add punctuation or a special symbol to existing text. To use this on-screen

keyboard, tap on the Transcriber toolbar.