HTC Imagio, WHIT100 Charging the Battery, Starting Up, Storage card, Turning the power on and off

Getting Started  19

Storage card

To have additional storage for your images, videos, music, and files, you can purchase a microSD™ card and install it into your phone.

To install a microSD card

1.Remove the back cover.

2.Locate the microSD card slot on the lower left part of the exposed panel.

3.Insert the microSD card into the slot with its gold contacts facing down until it clicks into place.

Note To remove the microSD card, press it to eject it from the slot.

Storage card slot

1.4  Charging the Battery

New batteries are shipped partially charged. Before you start using your phone, it is recommended that you install and charge the battery. Some batteries perform best after several full charge/discharge cycles.

Note Only the AC adapter and USB sync cable provided with your phone must be used to charge the phone. Use of unauthorized AC adapters and USB sync cables can impact the performance of your phone.

To charge the battery

1.Connect the USB connector of the AC adapter to the sync connector on your phone.

2.Plug in the AC adapter to an electrical outlet to start charging the battery.

Charging is indicated by a solid amber light on the Notification LED. As the battery is being charged while the phone is on, a charging icon also appears in the title bar of the Home screen. After the battery has been fully charged, a full battery icon appears in the title bar of the Home screen.

Warning! •  Do not remove the battery from the phone while you are charging it using the AC or car adapter. •  As a safety precaution, the battery stops charging before it overheats.

1.5  Starting Up

After installing and charging the battery, you can now power on and start using your phone.

Turning the power on and off

To turn on the power

Long press the END/POWER button for a couple of seconds.

When you turn on your phone for the first time, Windows Mobile starts up and prepares your phone for first time use. When the preparation process is complete, the Setup Wizard appears prompting you to follow the instructions on the screen to activate your phone, set up email, Visual Voicemail, Weather, customize the order of the Home screen tabs, and more.

To turn off the power

1.If the display is off, press the END/POWER button to turn the display back on.

2.Unlock your phone if the Lock screen is displayed. See “Lock Screen“ in this chapter for details.

3.Long press the END/POWER button for a couple of seconds.

4.Select Power Off from the Quick List.

Note The phone will enter Sleep mode in 3 seconds if you do not make a selection from the Quick List.