Set Up Your PC

Before using Modem Link, you must configure a new modem on the PC, and obtain the APN (access point name) from your ISP (Internet service provider). To connect through a USB port, you need to first set up a USB modem on your PC. Before setting up a USB modem, verify that you have the following files: USBMDM, USBModem_Dialer and ActiveSync has been installed on PC. Both files are available on the Getting Started CD.

To configure a USB modem on your PC, run the Getting Started CD from the CD-ROM of your PC and do the following:

1.Connect your device to the PC using the USB cable.

2.On your device, tap Start > Programs > Modem Link.

3.Select USB as the connection type.

4.Tap Activate on the Modem Link screen of your device. The “Found New Hardware” message appears on your PC.

5.On your PC, select Display a list of the known drivers for this device so that I can choose a specific driver and click Next.

6.In the Hardware types list, select Modem and click Next.

7.Click Next.

8.Click Have Disk, it will try to find the correct USB Modem driver from Disk.

9.Click Next, then it complete.

10.Copy the USB Modem Dialer from the Getting Started CD to your PC, then double-click the USB Modem Dialer.

11.Enter the GPRS settings (enter the APN assigned by your ISP).

12.Click Dial to start the connection.

Getting Connected 101

Page 101
Image 101
HTC WIZA100 user manual Set Up Your PC