Huawei HG622 manual

Models: HG622

1 29
Download 29 pages 41.58 Kb
Page 21
Image 21

3.Ensure that the terminal is properly connected to the socket through the power adapter.

If the POWER indicator is still off, contact an authorized maintenance center.

Step 2 After powering on the terminal, wait for about three minutes. Then, check whether the DSL indicator on the terminal is solid on.

If the DSL indicator blinks for a long time, perform further checks as follows:

1.Ensure that telephone lines are properly connected. Pay special attention to the connections between the telephone lines and the splitter.

2.Ensure that the terminal or telephone lines are far from the electric appliances that generate strong magnetic or electric fields. Replace telephone lines when necessary.

If the DSL indicator still blinks and does not turn solid on, contact your network operator.

Step 3 Check whether the LAN indicator of the terminal is on.

If the LAN indicator is off, perform further checks as follows:

1.Ensure that the network adapter of the computer is enabled.

2.Ensure that the network cable between the terminal and the computer is properly connected. Remove and then insert the network cable or replace the network cable when necessary.

If the LAN indicator is still off, contact an authorized maintenance center.

Step 4 Check whether the driver for the network adapter is properly installed. Take a computer that runs Windows XP as an example. To check whether the driver for the network adapter is installed, do as follows:

1.On the desktop, right-click My Computer, and then choose Manage.

2.In the navigation tree of the Computer Management window, choose Device Manager.

3.In the right pane of the Computer Management window, click Network adapters to view the information about the network adapter of the computer.

If no network adapter is found or if a question mark (?) or an exclamation mark (!) is displayed next to the icon of the network adapter, you can infer that the driver for the network adapter is not properly installed. In this case, re-install the driver for the network adapter of the computer.

Step 5 Ensure that you have entered the correct user name and user password that are required by the PPP dial-up software.

The user name and the user password are provided by your network

16

Page 21
Image 21
Huawei HG622 manual