Huawei U8860 Turning on the Data Service, Turning On Wi-Fi, Connecting to a Wireless Network

Your mobile phone will automatically read the access point settings from the SIM/UIM card (if any). For this reason, do not change the access point parameters; otherwise, you might not be able to access network resources.

7.1.2 Turning on the Data Service

1.Touch > Settings.

2.Touch Wireless & networks > Mobile networks.

3.Select the Data enabled check box to turn on the data connection.

7.2 Wi-Fi

Wi-Fi gives you wireless access to broadband Internet. To use Wi-Fi on your mobile phone, you must have an access to wireless access points (hotspots). Obstacles that block the Wi-Fi signal will reduce its strength.

7.2.1 Turning On Wi-Fi

1.Touch > Settings.

2.Touch Wireless & networks, and then select the Wi-Ficheck box to turn on Wi-Fi.

7.2.2 Connecting to a Wireless Network

1.After turning on Wi-Fi, touch > Settings.

2.Touch Wireless & networks > Wi-Fi settings. You will see a list of detected Wi-Fi networks in the Wi-Fi networks section.

3.Touch a Wi-Fi network to connect to it.

•If you select an open network, you will be automatically connected to the network.

•If you select a network that is secured with Wired Equivalent Privacy (WEP) and connect to it for the first time, enter the password as prompted, and then touch Connect. If you connect to a secured wireless network that you have already used, you will not be prompted to enter the password again unless you have reset your mobile phone to its default settings.

On the Wi-Fi settings screen, touch Add Wi-Fi network to add a new Wi-Fi network.

37