Guide of Main Menu
Automatic Search
The function of the Automatic Search menu is to search services using information from a satellite.
The following items are supplied as parameters.
Antenna Alternative
Specifies the satellite in which the automatic search will be performed.
Automatic Skip
Enables/disables the automatic skip option. If this option is enabled, the scrambled services are skipped during the search.
Search Type
Specifies search type. If the search type is “Detail”, then four symbol rates are added and used during the search.
Symbol Rate table(optional)
Upsets up to four symbol rates for searching when the search type is “Detail”.
To automatically search the services, proceed as follows:
1.Activate the Automatic Search menu.
2.Set all the parameters according to the satellite information.
3.Press the OK ( 
) button to start the search.
4.Press the EXIT ( 
) button to cancel during the search.
The Automatic Search may take a long time to search all the services, depending on the parameter settings.
Since the Automatic Search is based on
To obtain the updated information, please consult the HUMAX web site.
