3. Installation Wizard
3.2 Channel Search
You can search channels manually.
1.Select Frequency using the / button and press the OK or
button. Enter the value using the NUMERIC
2.Select Network ID using the / button and press the OK or
button. Enter the value using the NUMERIC
3.Select Symbol Rate using the / button and press the OK or button. Select a value you want using the / button and press the OK or button. If the required value is not listed, then select User Define and enter the value using the
4.Select Next and press the OK button to start channel search.
5.Please wait for finishing the channel search. If you want to stop the operation during search, press the OK button.
6.Select Save and press the OK button to save the result and go to the next step.
3.3 Result
Select Finish in the result screen and press the OK button to finish the installation wizard.
Warning: If you exit the install wizard without fully completing the channel searching procedure, you may not have all of the channels available. In this case, you can use the installation menu to search for the channels.
GB20
User’s Manual
