10. Installation
10.2 Default Setting
Default setting restores the product to the default settings.
Warning: Please note that once you perform default setting, all data such as channel list and user configured data are deleted, no information on the HDD will be lost.
1.Press the MENU button.
2.Select Installation using the / button and press the OK or button.
3.Enter the password using the
4.Select Default Setting using the / button and press the OK or button.
5.Select Yes and press the OK button to restore all setting to factory default. Select No and press the OK or BACK button to return to the previous menu.
6.Confirm again to start loading default setting. Enter the password using the
7.When completing the default setting, press the OK button to automatically run the installation wizard.
For detailed information about the installation wizard, refer to Chapter 3. Installation Wizard.
Note: The default password is 0000. If you have forgotten the password, please contact your local product distributor.
GB62
User’s Manual