References

1. DiSEqC 1.0 Connection

All our receivers are designed to be DiSEqC 1.0 compatible. This allows multiple antennae to be connected to the STB simultaneously.

If you have two or more fixed antennae or LNBs, you can use a DiSEqC 1.0 switch.

1.Connect the coaxial cable from the first LNB to the LNB 1 or LNB A DiSEqC switch input connector.

2.Connect the coaxial cable from the second LNB to the LNB 2 or LNB B DiSEqC switch in put connector.

3.Do the same for the other LNBs.

4.Connect one end of a Coaxial cable to the RF DiSEqC switch output connector and the other end to the LNB IN socket on the STB.

2. DiSEqC 1.2 Connection

Please refer to page GB46.

3. Connecting a Satellite antenna

You can connect either a single satellite antenna directly to the digital receiver or several antennae via the converter box or multi-feed equipment LNB.

You can connect a further Sat-receiver (for example analogue) to the common antenna equipment receiver that has satellite signals.

4. Loop Via

If you have another analogue or digital STB and you wish to use the same LNB, then you can connect it via the loop via. Connect one end of a Coaxial cable to the LNB OUT

on the STB and connect the other end to the LNB IN on your second STB.

GB4

Page 5
Image 5
Humax IR-ACE M manual References, DiSEqC 1.0 Connection, DiSEqC 1.2 Connection, Connecting a Satellite antenna, Loop Via