Safety Warning

9.LIGHTNING, STORM, or NOT IN USE

Unplug the product from the wall outlet and disconnect the cable during a thunderstorm or when left unattended and unused for long periods of time. This will prevent damage to the unit due to lightning and power-surges.

10.EXTRANEOUS OBJECTS

Do not insert anything through the openings in the unit, where they can touch dangerous voltage points or damage parts

11.REPLACEMENT of PARTS

When replacement parts are required, be sure the service technician uses replacement parts specified by the manufacturer, or those that have the same characteristics as the original part.

Unauthorized substitution may result in additional damage to the unit.

Warning

1.Follow these directions in order to avoid damage of the power cord or plug. Do not modify or process the power cord or plug arbitrarily.

Do not bend or twist the power cord.

Make sure to disconnect the power cord holding the plug.

Keep heating appliances as far as possible from the power cord in order to prevent the cover vinyl from melting.

The mains plug shall remain readily operable.

2.Follow these directions. Failure to follow any of them may cause electrical shock. Do not open the main body.

Do not insert metals or inflammable objects inside the product. Do not touch the power plug with wet hands.

Disconnect the power cord in case of lightning.

3.Do not use the product when it is out of order. If you continue to use the product when defective, a serious damage can be caused toit. Make sure to contact your local product distributor if the product is out of order.

4.Please do not insert metal or alien substance into the slots for the modules and Smartcards. It may cause damage to the product and reduce its life span.

GB 4

Page 5
Image 5
Humax IR-FOX C manual LIGHTNING, STORM, or not in USE, Extraneous Objects, Replacement of Parts