8. Installation
3.Network ID
1.Select Network ID using the 
button, and
press the OK 
or 
button.
2.Enter the network ID using the
buttons and press the OK 
button.
4. Search
You can complete the setting and start searching.
1.Select Search and press the OK 
button to start Channel Search.
2.Wait while the product searches for the channels, this may take a few minutes.
3.During operating search, the cursor is located
at Stop. Therefore, if you press the OK 
button during searching, the operation is stopped and only the channels found so far will be displayed.
**
4.If the search operation is successfully completed, and no channels are found, press
the OK 
button and try to reset the search operation again if necessary.
5.When completing channel search, select Save,
and press the OK 
button to save the changes.
GB 48
