Humax IR-FOX C manual Software Update, OTA Over the Air

9. Software Update

In order to maintain proper performance of the product, it is essential to have the most up-to-date software. Visit the Humax website to check the latest news and newly released software versions.

http://www.humaxdigital.com

It is recommended that you periodically check for the availability of software update.

9.1 OTA (Over the Air)

OTA, an abbreviation of Over–the-Air, is a standard for the transmission of software for equipment through cable. The manufacturers reserve the right to decide when and where an update is made available. The new software version is then downloaded via cable. The software update via cable will only occur under the following circumstances.

1. The equipment should have appropriate loader software.

Caution: Please note that if normal loader software is not equipped, the product may not be updated or operate properly after software update.

2. The manufacturer transmits the software via cable.

Caution:

•Please be careful to keep the power on and the power cord plugged in during software update. If the power is off during software update, fatal damage may be caused to the product.

•Please be careful not to pull out the RF cable during software update. Update may be interrupted and the product may not operate.

Note:

•The product will not activate while software update takes place.

•It may take 5 ~10 minutes to update software.

•Scheduling operation cannot work during software update.

GB 50