Select Readouts
(Advanced, Sonar view only)
Select Readouts sets individual digital readouts on the Sonar View. This Advanced feature allows you to select what data will be displayed in each of 5
Data windows can display readouts from supported accessories such as Temp/Speed. Each data window can either be empty or contain one of the following:
-Speed (will be displayed if a Temp/Speed Accessory is attached and the paddlewheel has moved at least once)
-Temperature
-Triplog (will be displayed if a Temp/Speed Accessory is attached and the paddlewheel has moved at least once)
-Voltage
Select Readouts
Depth Offset
(Advanced)
Depth Offset will adjust the digital depth readout to indicate depth from the waterline or boat's keel. Enter a positive vertical measurement from the transducer to the waterline to read the depth from the waterline. Enter a negative vertical measurement from the transducer to keel to read the depth from the keel. This menu choice is available only when in Advanced User Mode (see Setup Menu Tab: User Mode.)
To change the Depth Offset setting:
1.Make sure you are in Advanced User Mode, then highlight Depth Offset on the Setup menu.
2.Use the LEFT or RIGHT
Temp Offset
(Advanced)
Temp Offset will adjust the temperature readout by the amount entered. This menu choice is available only when in Advanced User Mode (see Setup Menu Tab: User Mode).
To change the Temp Offset setting:
1.Make sure you are in Advanced User Mode, then highlight Temp Offset on the Setup menu.
2.Use the LEFT or RIGHT
43 | 44 |
