Humminbird 981 manual Mark/Goto Key, Views available on your 900 Series are, Sonar views

98x_Manual_531376-1_A.qxd 2/23/2005 11:40 AM Page 39

If the cursor is not active, the following menu will be displayed. Use the 4-WAY Cursor Control key to select Nearest Port, Nearest Tide Station or Nearest Current Station, then use the RIGHT Cursor key to display the

VIEWS

The views available on your 900 Series™ are:

Sonar views: Navigation views:

requested information.

NOTE: The built-in UniMap™ does not contain Port, Tide or Current information. This information is only available from optional purchase MMC/SD cards.

MARK/GOTO KEY

(987c SI Combo models only)

Press the MARK key while in any view to mark the position of a waypoint, either at the current boat location, or, if the Cursor is active, at the current Cursor location.

If the Cursor is active, pressing the GOTO key while in any view creates a waypoint and starts navigation towards that waypoint. If the Cursor is not active, pressing the GOTO key displays the list of waypoints, so that you can select the waypoint towards which you want to navigate.

ZOOM (+/-) KEY

(987c SI Combo models only)

Press the - or + ZOOM keys while in any of the Navigation Views or the Sonar Zoom View to change the scale of the view to appear closer or farther away.

•Side Imaging View

•Sonar View

•Sonar Zoom View

•Split Sonar View

•Side/Sonar Combo View

•Self Test View

•Accessory Test View

•Bird’s Eye View

(987c SI combo only)

•Chart/Bird’s Eye Combo View (987c SI combo only)

•Chart View

(987c SI combo only)

•Chart/Sonar Combo View (987c SI combo only)

•Chart/Side Combo View (987c SI combo only)

•GPS Diagnostic View (987c SI combo only)

Chart/Side Combo View is the default view for the 987 SI Combo model when it is first powered up, while Side Imaging View is the default view for the 981 SI model when it is first powered up. When the VIEW key is pressed, the display cycles through the available views. When the EXIT key is pressed, the display cycles through the available views in reverse order. Any view can be hidden or displayed as part of the view rotation using the Views Menu tab.

NOTE: When you change any menu settings that affect the sonar, the view will update immediately (i.e. you don’t have to exit the menu to apply the change to the screen).

33