Off Course Limits
Arrival Alarm Circle
To change the Off Course Alarm setting:
1.Highlight Off Course Alarm on the Alarms main menu.
2.Use the LEFT or RIGHT
Setup Menu Tab
From any view, press the MENU key twice to access the tabbed Main Menu System, then press the RIGHT cursor key until the Setup tab is selected.
NOTE: Menu choices will vary depending on system settings such as whether the unit is set for Advanced User mode and what accessories are attached to the unit.
The following menu choices will be added to your Setup Menu Tab when a Handheld GPS is connected to the Matrix Fishing System:
Arrival Alarm
Arrival Alarm sounds when the boat has either exceeded the distance to the destination waypoint, or has entered the Arrival Alarm Circle, based on the menu setting when navigating. Arrival Alarm allows you to set how close the boat must be to the destination waypoint before the Arrival Alarm will sound.
To change the Arrival Alarm setting:
1.Highlight Arrival Alarm on the Alarms main menu.
2.Use the LEFT or RIGHT
Drift Alarm
Drift Alarm sounds when the boat has exceeded the distance from the boat’s anchored position, based on the menu setting. Drift Alarm allows you to set the size of a perimeter around the boat’s anchored position; if the anchored boat drifts outside of that perimeter, the Drift Alarm will sound.
•Units - Distance
•Units - Speed
•Triplog Reset
•Local Time Zone (Advanced)
•Daylight Savings Time (Advanced)
•Position Format (Advanced)
•Time Format (Advanced, International Only)
•Date Format (Advanced, International Only)
•NMEA Format.
See your Matrix Fishing System Operations Manual for information on the standard Setup Menu choices
Drift Alarm Circle
To change the Drift Alarm setting:
1.Highlight Drift Alarm on the Alarms main menu.
2.Use the LEFT or RIGHT
Setup Menu Tab
Drift Alarm Perimeter
30
31
