Delete a waypoint: From the Waypoints submenu, select Delete and press the RIGHT Cursor key to display a list of waypoints. Select the waypoint you want to delete, then press the RIGHT Cursor key. You will be asked to confirm deletion before the waypoint is actually deleted.

Navigate to a Waypoint or Position

Navigate to the cursor position: From the Track or Combo view, use the Cursor key to select a position or waypoint to which you want to navigate. Press the MENU key once to display the Navigation X-PressTMmenu. Select Go To and press the RIGHT Cursor key. Navigation will begin immediately.

Navigate to a specified waypoint: Press the MENU key once to display the Navigation X-PressTMmenu. Select Go To and press the RIGHT Cursor key. Then choose the waypoint to which you would like to navigate from the waypoint list and press the RIGHT Cursor key to select it.

Track

Scale

Waypoint

Trolling

Grid

Track View with Grid

Add or Remove a Trolling Grid: From the Waypoints submenu, select Grid and press the RIGHT Cursor key to display a list of waypoints. Select the waypoint to which you want to add the grid. The trolling grid will appear on all of the navigation views, and can be used as a guide when trolling around a waypoint. The grid can be rotated to any desired heading using Grid Rotation from the Navigation Main menu. To remove the trolling grid, choose Remove Grid from the Navigation X-Press™ menu.

NOTE: By repeating the previous instructions, you can add more waypoints to create a longer multi- segment route.

Skipping a waypoint: From the Navigation X-PressTMmenu, select Skip Next Waypoint and press the RIGHT Cursor key. If there is not another waypoint to skip to, navigation will be cancelled.

Cancel navigation: From the Navigation X-PressTMmenu, select Cancel Navigation and press the RIGHT Cursor key. Canceling navigation removes the route and any waypoints created.

Add a Waypoint Target or Trolling Grid

 

 

Add or Remove a Waypoint Target: From the

Waypoint

 

Waypoints submenu, select Target and press

Target

 

the RIGHT Cursor key to display a list of

 

 

waypoints. Select the waypoint you want to

 

 

target. A target consisting of concentric circles

Track

 

centered on the selected waypoint will appear

Scale

 

on all of the navigation views; the target shows

 

 

 

 

various distance ranges from the targeted

 

 

waypoint. To remove the target, choose Remove

 

 

Target from the Navigation X-Press™ menu.

 

 

 

 

Track View with Target

NOTE: Only one waypoint can have either a target or a grid at one time. If you apply a target or a grid to a new waypoint, the original waypoint will lose its target or grid.

NOTE: The spacing of the rings on the waypoint target and the spacing of the grid lines on the trolling grid is the same as the length of the scale bar on the left edge of the display. Zooming in or out will decrease or increase the spacing, respectively.

Save or Clear a Current Track

Save the current track: From the Navigation X-PressTMmenu, select Save Current Track and press the RIGHT Cursor key. The track will remain on the display, but will change from black to gray. To remove the track completely from the display, see Edit, Delete or Hide Saved Tracks.

NOTE: When you save a track, a name is automatically assigned. The track name consists of a date/time stamp, but can be re-named later (see Edit a Saved Track).

Clear the current track: From the Navigation X-PressTMmenu, select Clear Current Track and press the RIGHT Cursor key. The track will be removed from the display and discarded.

12

13

Page 9
Image 9
Humminbird AS GR4 manual Navigate to a Waypoint or Position, Add a Waypoint Target or Trolling Grid, Track View with Grid