Date Format
(Advanced, International Only)
Date Formatchanges the date format used by the unit. This menu choice is available only when in
Advanced User Mode (see Setup Menu Tab: User Mode.)International Models Only. Date Format
selects the format for the date display when Time + Date is selected as a Digital Readout on the
Sonar View. (see Select Readouts).
NOTE: See Setup Menu Tab: Select Readoutsand User Mode in your Matrix Fishing System Operations
manual.
To change the Date Format:
1. Make sure you are in Advanced User Mode, then highlight Date Format on the Setup menu.
2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Date Format. (mm/dd/yy,
dd.mm.yy or yy.mm.dd, Default = mm/dd/yy)
NMEA Output (Advanced)
NMEA Output turns the NMEA output on or off. This menu choice is available only when in
Advanced User Mode (see Setup Menu Tab: User Mode.)
NOTE: See Setup Menu Tab: User Modein your Matrix Fishing System Operations manual.
The following NMEA sentences are output:
DPT- Depth
MTW - Water Temperature
GLL - Lat/Lon Position
GGA - GPS Fix Data
RMC - Recommended Minimum Specific GNSS Data
VTG - Course Over Ground and Ground Speed
ZDA - Time and Date
When navigating, the following NMEA sentences are also output:
APB - Autopilot Sentence B
BWR - Bearing and Distance to Waypoint
RMB - Recommended Minimum Navigation Info
To turn NMEA Output on or off:
1. Make sure you are in Advanced User Mode, then highlight NMEA Output on the Setup menu.
2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the NMEA Output to On or Off
(Off, On, Default = Off)
35
Position Format (Advanced)
Position Format selects the format of the latitude and longitude position display. This menu choice
is available only when in Advanced User Mode (see Setup Menu Tab: User Mode.)
NOTE: See Setup Menu Tab: User Modein your Matrix Fishing System Operations manual.
To change the Position Format setting:
1. Make sure you are in Advanced User Mode, then highlight Position Format on the
Setup menu.
2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Position Format.
(dd.ddddd°, dd°mm.mmm', or dd°mm'ss", Default = dd°mm.mmm')
Time Format (Advanced, International Only)
Time Formatchanges the time format used by the unit. This menu choice is available only when in
Advanced User Mode (see Setup Menu Tab: User Mode.) International Models Only.Time Format
selects a 12 hour or 24 hour format for the time of day displayed when Time + Date is selected as a
Digital Readout on the Sonar View (see Select Readouts).
NOTE:See Setup Menu Tab: Select Readouts and User Mode in your Matrix Fishing System Operations
manual.
To change the Time Format:
1. Make sure you are in Advanced User Mode, then highlight Time Format on the Setup
menu.
2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Time Format. (12 hour, 24
hour, Default = 12 hour)
34