Hunter,R.F 83005 manual No Existing Fan, Existing Construction - accessible from above

Existing Construction – accessible from above

C11 EXISTING FAN

NO EXISTING FAN

OR

Remove an existing fan and check to make sure the	Use the motor housing as a template to mark position.
opening is large enough to accommodate the new
motor housing (9”x 9.75”).

			5”
		7
9”	.
	9

Cut out an opening for the housing.

C13

5/8	5/8
	1/2
1/2

C12

F

E

Slide the mounting rails into brackets.

C14

Position the correct depth mark at the bottom edge of the

joist based on the thickness of your sheetrock.

41952-01 3/13/2006

05-HF-008-Eng_3.13.06.indd 11

Mark position of screws by using holes as a template.

11

3/13/06 12:08:54 PM