6 SCPI Command Reference
Control Limit line Buzzer
:CALCulate:LLINe[1]:BUZZer[:STATe]
OFFON01
:CALCulate:LLINe[1]:BUZZer[:STATe]?
This command toggles the audio warning between on and off. If data exceeds the limit line the buzzer will sound an alarm.
*RST state: | Off |
Key access: | [Limit] > {Beep} |
|
|
Control Limit Line Testing
:CALCulate:LLINe[1]:[STATe] OFFON01
:CALCulate:LLINe[1]:[STATe]?
This command toggles the limit line testing between on and off.
If the limit line is turned on, limit pattern is automatically turned off.
*RST state: | Off |
Key access: | [Limit] > {Limit Line} |
|
|
Set Limit Line Y-axis value
:CALCulate:LLINe[1]:Y <ampl>
:CALCulate:LLINe[1]:Y?
This command sets the Y- axis value of a limit line.
Limit line Y- axis value is set independently and is not affected by the X- axis units.
*RST value: | 0 dBm |
Available unit: | dBm, |
Key access: | [Limit] > {Limit Line} |
|
|
104 | N9340A User’s Guide |