5Key Reference
•Any related parameter (e.g., center frequency) is changed.
Press Average (Off) to turn off averaging.
The number of sweeps can only be set using the numeric keypad, not the knob or arrow keys.
Key access: [TRACE] > {More (1 of 2)} > {Average}
Save Trace
Saves a current trace into a file (*.DAT).
The analyzer uses the same filename as the preceding file saved, and automatically adds an integer in 1, 2, 3 sequence at the end of the filename.
If there is no record of saved trace, the default file name of the current saved trace is “HYTRACE.DAT”.
Key access: [TRACE] > {More (1 of 2)} > {Save trace}
Save As
Saves a current trace in a file with a user- defined filename.
Your are allowed to enter the filename using the numeric keypad and using [ENTER] as a terminator.
Numbers, alpha characters and underline are all valid components of a filename.
Key access: [TRACE] > {More (1 of 2)} > {Save as}
Recall Trace
Recalls a saved trace as the current activated trace.
Key access: [TRACE] > {More (1 of 2)} > {Recall trace}
94 | N9340A User’s Guide |
