6 SCPI Command Reference
Amplitude Step
:TGENerator:AMPLitude:STEP <ampt> :TGENerator:AMPLitude:STEP?
This command sets the amplitude step size of the tracking generator output. This command is valid after tracking generator is enabled.
*RST State: | 1 dB |
Range: | 1 to 10 dB |
Min. Increment | 1 dB |
Available unit: | dB |
Key Access: | {Amptd Step} |
|
|
Amplitude Offset
:TGENerator:AMPLitude:OFFSet <ampt>
This command sets the amplitude offset of the tracking generator output. This command is valid after tracking generator is enabled.
*RST State: | 0.00 dB |
Range: | |
Min. Increment | 0.01 dB |
Available unit: | dB |
Key Access: | {Amptd Offset} |
|
|
136 | N9340A User’s Guide |