Agilent Technologies N9340A Saving a file, Quick saving a trace or a screen, USB memory stick

System Setting 4

Saving a file

	After you select a file type, you need to edit a file name by
N O T E
	pressing the numeric and alphabetic hardkeys on the right
	side of the analyzer’s front panel.

Refer to the following three steps to save a file:

1Press [SYS] > {File} > {File setup} to select the save path and file type.

2Edit a file name.

A file name can be consist of letters and digits. A single key stroke on the numerical keypad inputs a digital number; and consecutive key stroke selects and inputs a letter.

3Press {Save} to save the file.

When a file saving completes, the message “File Saved” displays on the bottom line of the screen.

	If you toggle the saving path to USB, files are automatically
N O T E
	saved into a folder named as N9340DATA in the root directory
	of the USB memory stick.
	If the USB memory stick connection can not be updated,
	remove the USB memory stick, then cycle the power and
	re-insert the USB memory stick again.

Quick saving a trace or a screen

Pressing [ESC/CLR] > [Save] allows you to quickly save a trace or a screen to either the local memory or an external USB device, depending upon the setup of the save path. For more information about

file setup please refer to “File Type" on page 60 and “Saving Path" on page 60.

Three steps for saving a trace or a screen:

1Press [SYS] > {File} > {File Setup} > {Shortcut Type} to indicate the shortcut type to either a trace or a screen copy.

2Press [SYS] > {File} > {File Setup} > {Save Path} to either local memory or an external USB disk.

N9340A User’s Guide 61