Existing Construction – accessible from above
| C11 | EXISTING FAN | |
|
|
|
OR
NO EXISTING FAN
Remove an existing fan and check to make sure the | Use the motor housing as a template to mark position. |
opening is large enough to accommodate the new |
|
motor housing (8”x 8.5”). |
|
|
| 5” |
8” | . | |
8 |
|
Cut out an opening for the housing.
C12 |
E |
D |
Slide the mounting rails into brackets.
C13 |
| C14 |
|
| 5/8 |
| 5/8 | 1/2 |
|
| |
| 1/2 |
|
Position the correct depth mark at the bottom edge of the
joist based on the thickness of your sheetrock.
Mark position of screws by using holes as a template.
11
028_41718_EngS_1.28.08_Arial.indd 11
1/28/08 10:47:30 AM