Telescoping Pole
19. Loosen the three remaining |
Grille Mounting Screws. Align |
Electrical Cover
Base
Wall
Plug
Keyslots
Cover Assembly Screw
the three keyhole slots in the |
Back Grille with the three re- |
maining Grille Mounting Screws |
in the Motor Face, and place the |
Back Grille onto the Motor Face, |
ensuring that the Grille Mount- |
ing Screw washers are between |
the screw head and the Back |
Grille. See Figure 8. |
FigURe 6
16. Install the fourth Cover Assembly Screw. Tighten all four Cover Assembly Screws to attach the Electrical Cover to the bottom of the Cast Iron Base.
17. Hold the wall plug out of the way and stand the fan upright.
18. Remove the upper left Grille Mounting Screw from the Motor Face. See Figure 7.
Upper Left Grille
Mounting Screw
Flat Portion
Motor Shaft
Grille Mounting Screws
FigURe 7
ENGLISH
FigURe 8
20.Rotate the Back Grille clockwise to situate the screws in the nar- row ends of the keyhole slots.
21.Reinstall and tighten the Up- per Left Grille Mounting Screw and tighten the three remaining Grille Mounting Screws.
continued