Assembly continued
ENGLISH
22.Loosen the Blade Assembly Setscrew so that it does not protrude into the inside of the Blade Assembly Sleeve. See Fig- ure 9.
Blade
Assembly
Setscrew
Setscrew
Hole
Blade
Assembly
Sleeve
FigURe 9
23. Slide the Blade Assembly Sleeve over the Motor Shaft, ensuring the Blade Assembly Screw is positioned over the Flat Portion of the Motor Shaft. See Figure 10. Tighten the Blade Assembly Set- screw so that it seats against the Flat Portion of the Motor Shaft. gently pull the Blade Assembly to ensure it is secure on the Motor Shaft.
FigURe 10
NOTE: For clarity, the Back Grille has been removed from Figure 10 to show the Blade Assembly Sleeve/ Motor Shaft installation.
24. With the Hunter logo facing forward and upright, engage the tabs on the lower part of the Front Grille into the rim of the Back Grille, as shown in Figure 11, arrow 1. Then, move the top of the Front Grille as shown in Figure 11, arrow 2, so that the tab at the top of the Front Grille snaps under the rim of the Back Grille.
2
1
FigURe 11