24. Slide the Blade Assembly Sleeve over the Motor Shaft, ensuring the Blade Assembly Screw is positioned over the Flat Portion of the Motor Shaft. See Figure 9. Tighten the Blade Assembly Set- screw so that it seats against the Flat Portion of the Motor Shaft. gently pull the Blade Assembly to ensure it is secure on the Motor Shaft.
ENGLISH
Figure 9
NOTE: For clarity, the Back Grille and Interlock Bracket have been removed from Figure 9 to show the Blade Assembly Sleeve/Motor Shaft installation.
25.With the Hunter logo facing for- ward and upright, engage the tabs on the lower part of the Front Grille into the rim of the Back Grille, as shown in Figure 10, arrow 1. Then, move the top of the Front Grille as shown in Figure 10, arrow 2, so that the tab at the top of the Front Grille snaps under the rim of the Back Grille.
2
1
Figure 10
26.Align the two ends of the Inter- lock Bracket with the two notches in the tab on top of the Front Grille. Press the two ends of the Interlock Bracket into the two notches of the tab on the top of the Front Grille. See Figure 11.
Figure 11
10 |