27. Place the Grille Ring over the Front and Back Grille rims, positioning the opening of the Grille Ring at the bottom of the Front and Back Grille rims. Bring the two ends of the Grille Ring together, and secure them with Grille Ring Latch. See Figure 12.

Operation

This appliance is for household use only.

1. Place the fan on a dry, safe, flat surface where it cannot fall or be pulled by the cord.

2. The Power/Speed Control

 

should always be OFF before

 

plugging or unplugging the fan.

 

Plug the fan into a grounded

 

120-volt AC electrical outlet

 

(ordinary household current).

ENGLISH

DO NOT use any other type of

voltage of the fan is the same as

outlet. Make sure that the rated

 

the power source before plug-

 

ging it into the power source.

 

3. Use the Power/Speed Control

 

to turn the fan “ON” or “OFF”.

 

See Figure 13.

 

4. To select the speed, move the

 

Power/Speed Control from OFF

 

to the desired speed setting:

 

O (off), I (low), II (medium), III

 

(High). See Figure 13.

 

Oscillation Pin

 

Power/Speed

ControlAngle

Adjustment

Knob

Figure 13

42729-01 12/20/2006

11