Storage
1. | To store the fan, disassemble |
| the Front and Back Grilles, |
| remove the Blade Assembly, |
| and clean the entire fan with a |
| damp cloth. |
2. | ALWAYS store the fan in a dry |
| place. |
3. | NEVER store the fan while it is |
| still plugged in. |
4. | NEVER wrap the cord tightly |
| around the fan. |
Troubleshooting
Problem• Fan will not work.
Solution•Make sure the Interlock Bracket is properly installed as directed in the assembly instructions. See page 9.
Problem
• Fan will not oscillate.
5. DO NOT put any stress on the |
Solution
ENGLISH
cord where it enters the fan, as |
it could cause the cord to break. |
• Push down the Oscillation Pin on top of motor housing to activate oscillation. See page 11.
Problem
•Can not adjust the angle of the fan.
Solution
•Loosen the Angle Adjustment Knob on the side of the fan neck. Adjust to the desired angle and tighten the knob. See page 11.
If you have tried these troubleshooting solutions and still have trouble, visit our Web site at http: //www.hunterfan.com.
HUNTER FAN COMPANY 2 5 0 0 F R I S C O AV E N U E MEMPHIS, TN 38114, USA
© 2006 Hunter Fan Co. | Printed in China |
13 |