Hunter Fan UH68ODK, UH68ODH manual UH68 ODK/ODH Tent Heater

Models: UH68ODH UH68ODK

1 29
Download 29 pages 34.59 Kb
Page 12
Image 12
Manual background

UH68 ODK/ODH Tent Heater

7.Uncoil remote control (2) inside tent and feed through the collar with the return duct(5). Attach remote control (2) to heater. Make main sure switch is in the off position.

8.Attach power cable (3) to heater then plug in to power supply. The green, main power LED, on the remote panel should illuminate.

9.Check fuel in can(14), fill if necessary with authorized fuel (see section one). Attach Suction Feed Adapter(15) and open vent(16).

10.Attach fuel supply line(17) to Suction Feed Adapter(15). Make sure drain cock(18) on supply line(17) is closed. Attach supply line(17) to heater QD fitting(19). Move the fuel can(14) as far away from the heater as possible without pulling the fuel supply line(17) taught.

11.Attach overflow line(20)

NOTE!

Open end of overflow hose should discharge to a safe, outside location along a downslope and below the level of the heater. A piece of commercial petroleum absorbent material (21), will be placed under the end of the overflow hose to catch any fuel that may spill.

12.Attach exhaust stack cap(22) to stack(23). Slide exhaust stack(22) through stack holder(24) on side of PUDA and over exhaust elbow. Push down on stack holder(24) to stabilize stack.

2

3

2-6

Page 12
Image 12
Hunter Fan UH68ODK, UH68ODH manual UH68 ODK/ODH Tent Heater