UH68 ODK/ODH Tent Heater
Operators Instructions
Chapter 2
Operating Instructions
Operator Controls and Indicators
2 1
3
4 |
| 6 |
| 5 | |
|
| |
Table 2. Controls and Indicators |
| |
Key | Control or Indicator | Function |
1 | Main Switch | Starts and stops heater. FAN position turns fan only on |
|
| for ventilation |
2 | Room Thermo | Set for desired temperature. * |
3 | Main Power LED (green) | Indicates heater is plugged in to AC power |
4 | Standby LED (green) | Indicates main switch is ON but room thermo is not |
|
| calling for heat |
5 | Heat LED (green) | Indicates main switch is ON and combustion system is |
|
| energized |
6 | Fault LED (red) | Blinks a diagnostic code for corresponding fault. (see |
|
| fault codes table 3) |
*Heat output is constant. Raising room thermo setting does not heat shelter faster.
