UH68 ODK/ODH Tent Heater
Table 3. Blink Codes
Number of Blinks | Problem |
1 | Low voltage at AC input (< 100 VAC) |
2 | Reverse polarity at AC input |
3 | High voltage (>130 VAC) |
4 | Not used |
5 | PC Board over temp |
6 | Not used |
7 | Not used |
8 | Ignition Fault Lockout |
Note: Only the Ignition fault lockout will shut down the heater. Any other code will flash the red led, but still allow the heater to operate normally.
4
3
2
1
Table 4.
Key | Connection / Fitting | Function |
1 | Power Receptacle | Connection for power cable |
2 | Remote Control Receptacle | Connection for remote control |
3 | Fuel Inlet | QD fitting for fuel supply |
4 | Fuel Overflow | QD fitting for fuel overflow |