Husqvarna manual Release lever Rider 175 AWD, Presentation

Models: 175 175 AWD

1 40
Download 40 pages 6.96 Kb
Page 15
Image 15
Release lever

PRESENTATION

Release lever

The release control must be pulled out in order for the machine to be moved when the engine is shutoff.

Should you attempt to drive the machine with the clutch controls pulled out it will not move. The drive on the axle is disengaged when one of the controls is pulled out.

Pull the controls to the end positions, do not use an intermediate position.

Release lever Rider 175

Pull out the control to disengage the drive system.

Push in the control to engage to the drive system.

Release lever Rider 175 AWD

Rider 175 AWD has one control for the front axle and one control for the rear axle.

IMPORTANT! Always drive the machine with both clutch controls pressed in.

Clutch control, rear axle

-Control drawn out, drive system disengaged.

-Control depressed, drive system engaged.

Clutch control, front axle

The control is positioned on the inside of the left front wheel.

-Rear control (pulled out), drive system disengaged.

-Front control (pushed in), drive system engaged.

English – 15

Page 15
Image 15
Husqvarna manual Release lever Rider 175 AWD, Presentation