Manuals / Husqvarna / Lawn and Garden / Lawn Mower

Husqvarna manual Stop the engine, Driving, Release lever Rider 175 AWD

Models: 175 175 AWD

1 40

Download 40 pages 6.96 Kb

Page 19

Stop the engine

Driving

Stop the engine

Preferably allow the engine to idle for a minute to obtain normal working temperature before stopping it if it has been working hard. Avoid idling the engine for long periods, as there is a risk of carbon build-up on the spark plugs.

1Lift up the cutting unit by pulling the lever backwards to its locked position.

2Move the throttle control to the MIN. position. Turn the ignition key to the ”STOP”.

3When the Rider is at a standstill, press down the parking brake and push in the locking button.

Release lever

The release control must be pulled out in order for the machine to be moved when the engine is shutoff.

Pull the controls to the end positions, do not use an intermediate position.

Release lever Rider 175 AWD

Rider 175 AWD has one control for the front axle and one control for the rear axle.

•Clutch control, rear axle

-Control drawn out, drive system disengaged.

-Control depressed, drive system engaged.

•Clutch control, front axle

The control is positioned on the inside of the left front wheel.

-Rear control (pulled out), drive system disengaged.

-Front control (pushed in), drive system engaged.

Release lever Rider 175

•Pull out the control to disengage the drive system.

•Push in the control to engage to the drive system.

English – 19

Image 19

Husqvarna manual Stop the engine, Driving, Release lever Rider 175 AWD

Contents

Operator′s manual Rider 175 Rider 175 AWDEnglish Service journal CONTENTSContents CONTENTSPre-delivery service Service journalAfter the ﬁrst 8 hours Towing INTRODUCTIONDear Customer Driving and transport on public roadsSerial Number Good serviceINTRODUCTION Symbols KEY TO SYMBOLSIf the engine is cold, use the choke KEY TO SYMBOLSCheck the engine’s oil level Check transmission oil level Lift up the cutting unit Apply the parking brakeGeneral use SAFETY INSTRUCTIONSSafety instructions Insure your RiderIMPORTANT INFORMATION Driving on slopesThis is what you do WARNING! You must use approved personalWARNING! The engine and the exhaust MaintenanceWARNING! The battery contains lead and ChildrenSAFETY INSTRUCTIONS TransportIMPORTANT INFORMATION Location of the controls WHAT IS WHAT?Speed limiter PRESENTATIONPresentation Throttle control/choke controlSeat Cutting height adjustment leverExercise care and refuel outdoors see safety instructions Lifting lever for the cutting unitPRESENTATION Release leverRelease lever Rider Release lever Rider 175 AWDIMPORTANT INFORMATION DrivingBefore starting Start the engineWARNING! Never run the engine indoors, in Starting the engine with a weak batteryConnecting the jump leads Remove the cables in the reverse orderother objects which can be thrown out by the blades Driving the RiderCutting tips WARNING! Clear the lawn from stones andRelease lever Rider 175 AWD Stop the engineDriving Release leverWARNING! No service procedures must be MaintenanceMaintenance schedule Daily maintenanceFront cover CleaningRemoving of the machine hoods Engine coverWARNING! A poorly adjusted parking brake Checking and adjusting the steering wiresAdjusting the parking brake Rider Adjusting the parking brake Rider 175 AWDReplacement of fuel ﬁlter Checking and adjusting of throttle wireMaintenance Maintenance Replacing the air ﬁlterWARNING! The exhaust system is hot. Let it cool before starting to replace the air ﬁlterIgnition system Controlling the acid level in a dry- charged batteryWARNING! Procedures on contact with acid Checking the fuel pump’s air ﬁlterMaintenance Check the safety systemChecking the engine’s cooling air intake when the engine is running. Mind your ﬁngersMain fuse Checking the tyre pressureMaintenance WARNING! Observe caution to avoid trapping your handMaintenance Adjusting the parallelism of the cutting unitRemoving the cutting unit Checking the cutting unit’s parallelismThere is a risk of crush injuries when working with the belt Service position for the cutting unitPlacing in the service position hands when working with the bladesMaintenance Restoring from service positionWARNING! Observe caution to avoid trapping your hand Removing the BioClip plug Checking the bladesMaintenance WARNING! Engine oil can be very hot if it is LubricationChecking the engine’s oil level Replacing the engine oilGeneral lubrication Lubricating the belt adjusterChanging the oil ﬁlter Checking the transmission oil levelProblem Troubleshooting scheduleProcedure Guard ServiceStorage Winter storageRider 175 AWD Technical dataDimensions RiderTechnical data EC-declaration of conformity Applies to Europe only´z+R?T¶6&¨ 38 - English ´z+R?T¶6&¨ Page 1150315-26 ´z+R?T¶6&¨ ´z+R?T¶6&¨